The Olympus CV-100 Video Processor provides high resolution, true color video imaging without image “break-up” due to developments in instantaneous single plate color chip technology.
- Automatic gain control (AGC): Maintains optimal brightness of the image even in lower light situations.
- Iris mode selection: Permits selection of either AVERAGE or PEAK exposure measurement. Normally, the AVERAGE setting is used. However, in certain situations, such as observation of the gastric angle, the PEAK setting may be selected. This setting reduces the light on the brightest part of the image, thus allowing more accurate observation and diagnosis.
- Fast Shutter: For most observations, shutter speed of 1/60 second is used. However, to eliminate blurred photographs when the subject or videoscopeis moving, you may select a higher shutter speed of 1/250 second.
- Hue Adjustment Level Indicator: This control for red and blue provides a broad range of adjustment for fine-tuning the image to meet your individual preferences.
Olympus CV-140
The Olympus CV-140 Video Processor delivers clear and accurate live visualization needed by surgeons during endoscopic surgical procedures. It can electrically magnify an image when there is not enough lighting and amplify outlines of endoscopic images, resulting in clear and sharp quality. It can connect to three monitors at the same time, giving it flexibility inside the Operating Room.
The Olympus CV-140 Video Processor is compatible with standard and big chip endoscopes. The CV-140 allows the user to enhance, freeze, and adjust color settings to provide clear and accurate images from inside the body.
- Automatic gain control (AGC) The image can be electrically amplified when the light is inadequate due to the distal end of the video scope being too far from the subject.
- Iris mode selection The area over which light is measured can be changed according to the body part that is being observed. The following selections can be performed using the “IRIS” switch on the front panel. AVE: during normal observation; Peak: When focusing on and/or observing a small bright area.
- Freeze screen display A stationary image can be displayed using the endoscope switch, keyboard or OVC switch.
- Video signal output VBS composite, Y/C, RGB; simultaneous output is possible.
Olympus CV-160
The Olympus 160 CV Video Processor is designed exclusively for the EVIS EXERATM 160 Series, the CV-160 features a leading-edge video signal processing technology configured to frequency components specifically suited for endoscopic images, allowing it to enhance details while simultaneously suppressing noise. The result is a more detailed image that makes it easier to spot minute tissue textures and subtle color variations on the mucous membrane.
- Powerful structure enhancement circuitry uses frequencies specifically suited to endoscopic images to ensure more accurate observation.
- Offers full height mode that uses the full vertical area of the monitor screen to display images larger, allowing for closer examination of the image area.
- Ergonomically designed front panel is user-friendly and the newly designed keyboard provides for clear and simple operation.
- Can be used with EVIS Exera video bronchoscopes as well, enabling you to use the same system for both gastrointestinal endoscopy and bronchoscopy.
- Compatible with EVIS 100/130/140 Series scopes.
- Scope ID function offers more efficient management and control, including automatic control of white balance and maintenance reminder.
Olympus CV-200
This product is compatible with standard and big chip endoscopes. It allows the user to enhance, freeze and adjust colour settings to provide clear and accurate images from inside the body. Requires clv-u20/u40.
- The processor is fully compatible with the Olympus EVIS universal light source
- Compatible with EVIS Video scope 200 series
- Compatible with EVIS CLV-U20 light source
- Power Requirements: 120V AC, 50/60Hz
- Dimensions: (W) 450 mm x (H) 90 mm x (D) 485 mm
- Weight: 33.10 lbs.
Olympus Evis CV-180
The Olympus 180 Video Proceesor offers a picture-in-picture display for any combination of endoscopic, fluoroscopic, ultrasound, laparoscopic, and images from the endoscope position detecting unit. The Scope IDTM function for easy endoscopy suite management and for next-generation system expansion. It has the Automatic Iris which eliminates the need for switching between Peak and Average required in conventional manual adjustment.
- Equipped with high-resolution HDTV imaging capability to assure the best-possible image quality for endoscopy and laparoscopy.
- Compatible with EVIS 100/130/40 Series and EVIS EXERATM 160 Series scopes as well as bronchoscopes and surgical endoscopes.
- Narrow Band ImagingTM (NBI) to enhance the visibility of fine capillaries and the mucosal tissues in the GI tract.
- Two types of structure enhancement are available — the original Type A for observation of larger mucosal tissues with high contrast, and the new Type B for observation of smaller tissues, such as capillaries.
- Electronic magnification enlarges moving or still images at the touch of a button by 1.2x or 1.5x with no loss of quality.
Olympus Evis CV-240
The Olympus CV-240 Video Processor is compatible with standard and big chip endoscopes. The CV-240 allows the user to enhance, freeze, and adjust color settings to provide clear and accurate images from inside the body.
- Compatible with the full range of endoscopes from EVIS 100, 130 and 140 series endoscopes
- Wide screen image functionality with used in conjunction with Q series endoscopes such as GIF-Q140 and CF-Q140L
- Pre-set scope switch functions. Endoscopist has a choice from up to 20 pre-set endoscope switch functions
- Pre-program patient data. Up to 40 files of patient data can be pre-entered into memory to expedite procedure turn around
Olympus Evis Exera III CV-190
The Olympus Evis Exera III CV-190 video system center provides video processing for advanced endoscopy. The system enables easy access to the range of features in the Evis Exera III endoscopes. The New and improved image processing delivers outstanding image quality, thanks to reduced noise and halation along with improved color contrast for optimal image quality.
- NBI (Narrow Band Imaging) in Evis Exera III 190 Series scopes provides twice the viewable distance of Evis Exera II 180 Series scopes and offers significantly brighter images.
- CV-190 features the ability to switch the point of focus between ‘near’ and ‘normal’ with the push of a button.
- Newly designed, waterproof one-touch connector enables a one-step connection to the light source and does not require a separate scope cable for the video processor.
- The pre-freeze function selects the clearest still image automatically saving time.
- The CV-190 is compatible with EVIS 100/130/140/150 Series, EVIS EXERA 160 Series, EVIS EVERA II 180 Series, GI/BF/ VISERA Series scopes, and EVIS EXERA III 190 Series.
Pentax EPK-1000
The Pentax EPK 1000 is a compact, Lightweight Digital Video Processor with integrated Xenon Light Source. Featuring PENTAX DSP technology, the EPK-1000 Digital Video Processor used in conjunction with PENTAX Video Colour CCD Endoscopes delivers images of outstanding quality for enhanced endoscopic diagnosis and therapy.
- All Digital System: a combination of PENTAX DSP technology (Digital Signal Processing) and high resolution Colour CCD chips delivering Full Vision endoscopic images with enhanced brightness and resolution.
- Automatic DSP Colour Adjustment and Contour enhancement for optimised visual examinations.
- High performance Short Arc Xenon Light Source and Digital Brightness Control for superior illumination.
- Intuitive data management for fast storage and management of patient and user data.
- USB port for easy and convenient transfer of still images to a PC.
- Safe, future-proof investment due to full compatibility with all K Series PENTAX endoscopes.
- Full range of output connectors supporting a variety of peripheral equipment.
Pentax EPM-3000
Features: - Processor with Xenon light source.
- Employs a high speed rotating color filter system producing the most natural color image.
- On-screen data.
- Freeze mode.
- Infrared capability.
- Built-in auxiliary lamp.
Pentax EPM-3300
Features: - High-resolution image with 1 billion colours through digital processing of the RGB signals with 10-bit depth of shade per channel.
- Precisely differentiated colour reproduction and digitally controllable contour enhancement for optimum optical evaluation possibilities.
- Superb illumination with high-performance Xenon light source and digital brightness control.
- Easy and intuitive data management for rapid storage and management of patient and user data.
- Extensive possible connections for peripheral equipment.
- Individual monitor configuration options.
Pentax EPM-3500
Features: - High-resolution image with 1 billion colours through digital processing of the RGB signals with 10-bit depth of shade per channel.
- Precisely differentiated colour reproduction and digitally controllable contour enhancement for optimum optical evaluation possibilities.
- Superb illumination with high-performance Xenon light source and digital brightness control.
- Easy and intuitive data management for rapid storage and management of patient and user data.
- Extensive possible connections for peripheral equipment.
- Individual monitor configuration options.
Storz AIDA DVD-M Image Management System
Features: - Digital storage of still images, video sequences, and audio files.
- Digital alternative to video printer and video recorder.
- Compact housing.
- Easy and intuitive handling via touch screen, camera head buttons, or footswitch.
- Archiving on DVD, CD-ROM, USB stick, or network path, multisession and multipatient.
- SDI, S-Video, and composite video inputs.
- ALl video signals are transferred directly to the video monitor.
- Print-out of still images via HP ink jet printer.
- Compatible with Karl Storz Communication Bus (SCB) and OR1 connect series.
